Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, Phillips screws M4 × 25,
(with spring and plain washers) Nuts M4 ;
Material, Iron, zinc plating; Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3JK.
Page: Dimensions, 5.
Size: M30, Shielded.
Sensing distance: 15 OMRON D3V-66M-1A4. 0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 44 (58)
D3V-66M-1A4
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated OMRON D3V-66M-1A4.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) .
Modular construction simplifies customization. Actuator: Roller plunger (Metal roller).
Cable length: 5 m.
Pull-outing direction of cable: Vertical.
Built-in switch: 1NC/1NO (slow-action).
Smallest Class of Safety Limit Switches the World.
The world''s smallest limit switch with a direct opening,
mechanism (four-contact construction model) OMRON D3V-66M-1A4.
High-sensitivity safety limit switch.
Built-in switches with two- or four-contact construction are available.
Degree of protection: IP67.
Conforms to EN115-1, EN81-1 and EN81-2.
(slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Control output 1: Relay output.
Control output 2: --.
Auxiliary output: Three.
Communications: --.
Heater burnout: One.
Event inputs: Four.
Power supply voltage: 100 to 240 VAC.
Large White PV Display That’s Easier to Read.
Easy to Use, from Model Selection to Setup and Operation.
A Complete Range of I/O Capacities,
Functions, and Performance.
Handles More Applications.
The white PV display with a height of 15.2 mm improves visibility.
High-speed sampling at 50 ms.
Short body with depth of only 60 mm.
Easy connections to a PLC with programless communications.
Use component ccommunications to link Temperature,
Controllers to each other D3V-66M-1A4.
Capacity: 32K word.
Access time: 150ns.
When using SYSMAC-CPT, can not be written in EPROM.
To write a program to the EPROM, use the standard PROM writer.
Before the EPPPRROM memory card into the CPU, to connect the EPROM to the EPROM memory card D3V-66M-1A4.
If you remove the EPROM memory card from the CPU,
Will not lose its data.
D3V-66M-1A4 Operation manual/Instructions/Model selection sample download link:
/searchDownload.html?Search=D3V-66M-1A4&select=5