Type: Shielded.
Appearance: Cylindrical, 8 dia. × 22 mm.
Sensing distance: 2 mm.
Repeat accuracy: 2 μm.
Cable specification: Standard .
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application F3ZN-S1695N15-01. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads F3ZN-S1695N15-01
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function F3ZN-S1695N15-01.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations .
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit. Mounting type: W-bracket(see note).
Contact form: 4PST-NO.
Quick-connect terminals.
A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor F3ZN-S1695N15-01.
Miniature hinge for maximum switching power for motor loads,
as well as resistive and inductive loads .
No contact chattering for momentary voltage drops up to 50%,
of rated voltage.
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and between the coil and contacts.
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
Size: 96 x 96mm.
Type: Platinum resistance.
Adjustment mode: ON/OFF action or PID action.
Alarm: single alarm.
Output: relay output.
Temperature controller with single alarm output.
SV and PV can be displayed at the same time.
Multiple temperature range allows setting the optimum temperature range.
The protection function can prevent the error in operation. Type of input: AC voltage input.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not eqquipped with .
The most suuitable voltage and current signal simulation, measurement and display, identification of the panel table OMRON F3ZN-S1695N15-01.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gaaugge for monitoring the operation trend OMRON F3ZN-S1695N15-01.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet type
F3ZN-S1695N15-01 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F3ZN-S1695N15-01&select=5