Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A).
Operation: Alternate operation (Self-holding).
Case color: Light gray.
Output: DPDT.
Lighting: Incandescent lamp; 28 VDC/VAC.
Pushbutton color symbol: 2.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity E2A-M12LS04-WP-C2 2M.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting) E2A-M12LS04-WP-C2 2M
included in lineup. Number of beams: 50.
Protective height: 1025mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors E2A-M12LS04-WP-C2 2M.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions . Actuator: Roller plunger.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms E2A-M12LS04-WP-C2 2M.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement .
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Operating modes: Power OFF Delay.
Supply voltage: 24 to 48 VAC/DC.
Control output: Contact output: SPDT.
H3DK-H: S Series (time range: 0.1 to 12 s).
Set two time ranges with each Timer, from 0.1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series. Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an iideal indicator for judging whether an automatic device and a screening device are qualified OMRON E2A-M12LS04-WP-C2 2M.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for moonitoring the operation trend OMRON E2A-M12LS04-WP-C2 2M.
External event input can be applied to a variety of measurement and identification situations.
Can enter DC0.001mV to
E2A-M12LS04-WP-C2 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2A-M12LS04-WP-C2 2M&select=5