Power supply: DC power supply.
Output method: Transistor output sink type.
Inputs points: 24 points.
Outputs points: 16 points.Ideal for Voltage Monitoring for.
Industrial Facilities and Equipment.
Monitor for overvoltages and undervoltages simultaneously.
Separate settings and outputs supported for overvoltages and undervoltages OMRON G3PA-450B-VD-2 DC12-24.
Manual resetting and automatically resetting supported by one Relay G3PA-450B-VD-2 DC12-24
Pre-alarm Monitoring Mode.
Two SPDT output relays, 5 A at 250 VAC (resistive load).
Process control signal (0 to 10 V) and current splitter input supported.
Output status can be monitored using LED indicator OMRON G3PA-450B-VD-2 DC12-24.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply . Appearance: 4 dia.
Sensing distance: 1.2 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NO.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5 OMRON G3PA-450B-VD-2 DC12-24. 4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available .
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Extremely small, with high sealing performance.
The cable leads to protection structure form, meet the JIS waterproof, and IEC IP67.
Using ambient temperature for -40 to +85 degree.
Using gold alloy cross bar contact and coil spring to realize long life and high reliability. Lock method: Mechanical lock.
Conduit size: G1/2.
Voltage for solenoid: 24 VDC.
Without indicator 1NC/1NO+ 1NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-cast body incorporating a switch box with,
degreee of protection satisfying IP67, UL, and CSA TYPE6P, 13 G3PA-450B-VD-2 DC12-24.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available G3PA-450B-VD-2 DC12-24.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
G3PA-450B-VD-2 DC12-24 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=G3PA-450B-VD-2 DC12-24&select=5