A small limit switch for the Chinese market.
Small longitudinal Asian standard size.
Miniaturization design of the 1/3 of the OMRON longitudinal type limit switch.
Terminal fully open structure, easy wiring.
RoHS correspondence.
Protection structure IP65. Input type: DC voltage input type.
Output type: linear; voltage; NPN open collector (HH, H, PASS, L, LL) OMRON E2E-X20MD1-M1GJ-Z 0.5M.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with E2E-X20MD1-M1GJ-Z 0.5M
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table OMRON E2E-X20MD1-M1GJ-Z 0.5M.
Action determine the color, can switch the green / Red 2 kinds of color display .
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet typeNo. of notches: 2 notches.
Output: SPDT OMRON E2E-X20MD1-M1GJ-Z 0.5M.
Reset method: Manual.
Lighting method: Non-lighted.
Separate Construction with Cylindrical .
16-dia. Body.
Same separate construction as the A16-series Pushbuttons with,
Miniature Design of 28.5 mm.
The same contacts can be used for both standard loads and,
microloads.
Oil-resistant IP65 models,
Conforms to EN60947-5-1. Actuator: Roller lever (resin lever, resin roller).
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input .
DeviceNet; DeviceeNet:-- E2E-X20MD1-M1GJ-Z 0.5M.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Digital rotating pulse meter with high speed measurement for 50kHz.
Action determine the color, can switch the green / Red 2 kinds of color display. .
Measurement of 50kHz high speed pulse E2E-X20MD1-M1GJ-Z 0.5M.
Rotary encoder and a variety of ON/OFF pulse signals, the most up to 50kHz of high-speed pulse measurement.

E2E-X20MD1-M1GJ-Z 0.5M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2E-X20MD1-M1GJ-Z 0.5M&select=5