Type of input: AC voltage input.
Output type: transistor; -; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth OMRON F3SJ-A0578P14.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table F3SJ-A0578P14
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON F3SJ-A0578P14.
DeviceNet type systemSize: M30, Non-shielded .
Sensing distance: 30.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 66 (86).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON F3SJ-A0578P14.
Problems such as the collision of workpieces are eliminated .
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E32-D11 type: standard type; resistance to twists and turns,
Specialty: M6 screw,
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsNumber of beams: 23.
Protective height: 240mm.
Model: NPN output.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicatted from the start of operation F3SJ-A0578P14.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions F3SJ-A0578P14. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
F3SJ-A0578P14 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F3SJ-A0578P14&select=5