Dimensions: A, 500mm; B, 400mm.
Model: Black.
Safety outputs: SPDT-NO.
Auxiliary outputs: SPDT-NC.
Rated voltage: 24 VDC.
Terminal block type: Screw terminals.
New Safety Mat That Is Easy to.
Install and Maintain.
Simple connection allows multiple mats to be joined together.
A wide variety of mat sizes are available OMRON E3S-CR11 2M.
Obtained EN1760-1 and EN ISO13849-1 (PLd/Safety.
Category 3) certification
E3S-CR11 2M
Complies with North American safety standards,
including ANSI/RIA15.06-1999. No. of poles: 4.
Connection method: Soldering.
Suitable cable dia: 3 mm (3 to 4).
Core conductor size: 0.5 max.
Suitable sheath material: PVC, PE, PUR OMRON E3S-CR11 2M.
Straight Connectors.
Minimum order: 50.
Round Water-resistive Smartclick .
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors OMRON E3S-CR11 2M.
A full line-up of models is planned.
Connectors with Cables are UL approved . Appearance: M4.
Sensing distance: 2 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Release key type: Trapped key *1.
Indicator: Green.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+3NC.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two ssafety circuits and two monitor contacts provide an,
array of monitoring patterns E3S-CR11 2M.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas. .
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas E3S-CR11 2M.
IP67 degree of protection.
E3S-CR11 2M Operation manual/Instructions/Model selection sample download link:
/searchDownload.html?Search=E3S-CR11 2M&select=5