Main contacts: 3PST-NO.
Auxiliary contact: SPST-NC.
Number of input channels: 1 channel or 2 channels.
Reset mode: Manual reset.
Input type: + common.
Rated voltage: 24 VAC/VDC.
Ultra Slim Safety Relay Unit.
Models of width 17.5 mm available with 2 or 3 poles. Models.
of width 22.5 mm with 3 poles also available OMRON E2G-S08KN02-WP-B2.
Conforms to EN standards. (TÜV approval).
DIN track mounting possible. High-Speed and High-Precision E2G-S08KN02-WP-B2
G5 Series EtherCAT Communications.
with the Controller.
High-accuracy positioning with fully-closed control.
Servo Drives for 400VAC globally widens applicable systems.
and environment, including large-scale equipment OMRON E2G-S08KN02-WP-B2.
Safe design and Safe Torque Off (STO) function .
Vibration can be suppressed in acceleration/deceleration,
even in low-rigidity mechanical systems. Prevents Equipment Stoppage, Data Loss,
and Other Problems Resulting from Momentary.
Power Failures.
Provides a backup time of 500 ms at an output current of 2.5 A.
Can be wired to the 24-V output from the S8VS Supplies OMRON E2G-S08KN02-WP-B2.
Connects to an S8TS Power Supply via an S8T-BUS03 Bus Line Connector.
Parallel connections to up to four Blocks can be used to increase,
the backup time and current capacities .
Complies with SEMI F47-0200 standard.
RoHS-compliant.
Ambient operating temperature range of –20 to 60°C. Size: 48 x 96mm.
Control output 1: relay output.
Control output 2:--.
Auxiliary output: 2 independent points.
Power supply voltage: AC100 ~ 240V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: -.
Communication: RS-485.
Event input: 4 points.
Remote SP input: there.
Transfer output: have.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point traansfer output and remoote SP input, suitable for a wide range of applications E2G-S08KN02-WP-B2.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperratture controller is connected to each other by using the component communication E2G-S08KN02-WP-B2.
A new type of proportional control allows you to control the valve.
E2G-S08KN02-WP-B2 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2G-S08KN02-WP-B2&select=5