Sensing method: Through-beam (Emitter + Receiver).
Connection method: Pre-wired (2 m).
Sensing distance: 500 mm.
Operation mode: Light-ON.
Model: PNP output.
Makes Mounting and Installation Simpler and Smoother.
Suitable for Applications in the Rechargeable Battery Industry. Ratings: 1 A at 125 VAC OMRON E2E-S05S12-CJ-B2 0.3M.
LED indicator: Without indicator.
Actuator: Plastic rod.
Many Models Including Roller Lever E2E-S05S12-CJ-B2 0.3M
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection OMRON E2E-S05S12-CJ-B2 0.3M.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) .
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Safety outputs: Instantaneous, --; OFF-delayed, 4 PST-NO.
Auxiliary outputs *1: 1(Semiconductor).
OFF-delay time: *2.
Rated voltage: 24 VDC OMRON E2E-S05S12-CJ-B2 0.3M.
Terminal block type: Spring-cage terminals.
Logical AND Function Adds Flexibility to I/O Expansion .
Facilitates partial or complete control system setup.
Solid-state outputs (excluding Expansion Units).
Detailed LED indications enable easy diagnosis.
TÜV SÜD certification for compliance,
with IEC/EN61508 (SIL3), EN ISO13849-1 (PLe/Safety Category 4).
Approved by UL and CSA.
New unit joins the Series with the following two additional features:
-OFF-delay time of up to 150 seconds can be set.
-Two logical AND connection inputs. Terminal type: Exposed-lead Models.
Protective tubing diameter D (mm): 8 dia. . .
Protective tubing length L: 20cm.
Lead wire type: Standard.
Lead wire length M : 8m.
A Wide Variety of High-precision.
Temperature Sensors.
Previous models with M3 screw connections have been joined,
by new models with ferrules to help reduce wiring work.
Ideal for the thermal input devices of Temperature Controllers.
Select from a wide variety of Temperature Sensors according,
to the temperature to be measured, location, and environment,
and also according to the type and shape of the terminal. Output: SPDT.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 100/110 VAC/VDC.
Pushbutton colorsymbol: R: reed, Y: yellow; PY: pure yeellow
G: green, A: blue; W: white; PW: pure white E2E-S05S12-CJ-B2 0.3M.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detaachhable Switch E2E-S05S12-CJ-B2 0.3M.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
E2E-S05S12-CJ-B2 0.3M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2E-S05S12-CJ-B2 0.3M&select=5