Item: Three/four-pole Surge Killer Unit.
Protect 61F Controllers Against Lightning.
A high-capacity protective device to protect against induced,
lightening damage.
Used in locations that are susceptible to induced lightening,
damage, such as elevated water tanks and high-altitude,
locations. Contact type: Standard load (250 VAC, 2 A; 125 VDC 0 OMRON ZN-CTM11-100A. 4 A).
Operation: Alternate operation (Self-holding) ZN-CTM11-100A
Output: SPDT.
Lighting: Incandescent lamp, 6 VAC/VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton
n @. R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with OMRON ZN-CTM11-100A.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation .
Easy panel mounting from the front and simple lamp replacement.
without tools. Type: temperature measurement impedance type.
Adjustment mode: ON/OFF action or PID action.
Alarm: there.
Output: relay output.
Digital universal single display electronic temperature controller DIN 48 * 48mm self tuning (self-tuning) PID control OMRON ZN-CTM11-100A. "Appearance: Square/Projection type LED lighting,
(without Voltage Reduction Unit) A22L-D .
Output: SPST-NC + SPST-NC.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a meeasurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program ZN-CTM11-100A.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communicaatiions procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components ZN-CTM11-100A.
ZN-CTM11-100A Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=ZN-CTM11-100A&select=5