LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
MR-JHSCBL20M-H MITSUBISHI MR-JHSCBL20M-H
MITSUBISHI MR-JHSCBL20M-H
Cable length: 30m.
For MR-J2S-700A (4) /CP/CL or less.
Encoder for HC-SFS; HC-LFS; HC-RFS; 2000r/min HA-LFS; HC-UFS servo motor.
-H products have a long flex life.
Motor series: ultra low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.4kw.
Rated speed: 3000rpm MITSUBISHI MR-JHSCBL20M-H.
With the brake: not with brake.
Without GB.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, and the control of the servo amplifier is controlled by the U/V/W three-phase electric electromagnetic field,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver is compared,
Adjust the rotor rotation angle MR-JHSCBL20M-H
The accuracy of the servo motor is determined by the resolution of the encoder. MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.
Rated output: 30.0kw.
SSCNET interface.
Voltage: 3 phase AC200VAC or single phase AC230V MITSUBISHI MR-JHSCBL20M-H.
Complete synchronization system with SSCNET high speed serial communication,
The communication cycle between the controller and the servo amplifier is the longest 0 . 888ms.
Such systems will be able to provide high reliability and high performance.
When connecting the servo system with SSCNET,
In the motion system, the parameters of the servo amplifier and the acquisition of the data will be displayed on the motion controller.
Connect a dedicated cable with an amplifier and a controller to form a SSCNET system.
This simple connection method reduces the routing time and helps to prevent noise.
Even in the MELSERVO-J2-SUPER series products using high resolution coding standards, the command frequency is no limit.
It is only necessary to add a battery on the servo amplifier, which can form the absolute value system.
Currently there are more than 1000000 high reliability SSCNET servo amplifier networks in use.Applicable motor capacity: 7.5KW.
Rated current: 1.2A.
Power supply voltage: three phase 400V.
Frequency converter and GOT supporting the use, to achieve a higher price.
SIMPLE GOT series can be directly connected to the IS70 series inverter.
GOT can be directly connected with the inverter. After connecting the two, the communication parameters can be automatically set.
In addition, the software can display the soft component of the control funnction in the GOT, even when the multi frequency converter is connected,
Can also be unified management with 1 GOT MR-JHSCBL20M-H.
Through the GOT screen to create software to import the picture data after the GOT,
Only use RS-422 connection GOTT aand frequency converter,
Can change the inverter speed / direction, monitoring the output frequency / output current and set a variety of parameters MR-JHSCBL20M-H.
MR-JHSCBL20M-H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-JHSCBL20M-H&select=5


...more relevant model market price >>>>
Related products
MITSUBISHI
Encoder cable
MR-JHSCBL10M-H
MITSUBISHI Encoder cable MR-JHSCBL10M-H
Cale length: 10m. For MR-J2S-700A 4 /
MITSUBISHI
Encoder cable
MR-JHSCBL5M-H
MITSUBISHI Encoder cable MR-JHSCBL5M-H
Cale length: 5m. For MR-J2S-700A 4 /C
MITSUBISHI
Encoder cable
MR-EKCBL20M-H
MITSUBISHI Encoder cable MR-EKCBL20M-H
The length of the line: 20M. Relay type.
MITSUBISHI
Encoder cable
MR-JHSCBL10M-L
MITSUBISHI Encoder cable MR-JHSCBL10M-L
Cale length: 10m. For MR-J2S-700A 4 /