Servo motor series: flat type, medium power.
Rated output: 0.75kw.
Rated speed: 2000r/min.
Electromagnetic brake: with.
Shaft end specification: Standard (straight axis).
Features: flat type of the model is very suitable for servo motor installation space is limited occasions.
IP level: IP65.
Application example:
1, industrial robots MITSUBISHI MR-J2M-8T.
2, food processing machinery.
Abundant motor product line can optimize the performance of the machine MR-J2M-8T
Has a rich motor product line including a rotary servo motor, linear servo motor and direct drive motor. Cable length: 5.0m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU MITSUBISHI MR-J2M-8T.
Applicable models: GT16, GT15, GT11. Power: 15kw .
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor MITSUBISHI MR-J2M-8T. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor .
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Type: HF-SN servo motor, medium inertia power.
Rated output power: 1.0kw.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Oil seal: have.
Encoder resolution: 131072p/r.
S100 representative: Super MR-E special motor.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load.
Enhanced system cost performance.
High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque control.
Wide use.
Machining equipment and machine tool feed .
UUsed for food, packaging equipment and feeding device MR-J2M-8T.
For textile machinery, etc..
Can improve the performance of equipment.
Servo amplifier terminals are used to reduce the required wiring time.
The connector is located in front of thhe servo amplifier, which is convenient for cable connection MR-J2M-8T.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
MR-J2M-8T Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-J2M-8T&select=5