Length: 1.5m.
Specifications: FX circular connectors, FX-232AWC-H between. Servo motor series: low inertia, small capacity.
Rated output: 0.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: No.
Oil seal: have.
Corresponding servo amplifier: MR-JE-10B/MR-JE-10A.
Support position control, speed control, torque control, push and press control MITSUBISHI HC-SFS52K.
Position control can use linear, arc interpolation controller, fixed size feed control, target position change and other rich functions HC-SFS52K
The position control and torque control are realized by switching control mode.
The gain adjustment of servo can be simply performed by the advanced one key tuning function MITSUBISHI HC-SFS52K.
At the same time, it is also able to suppress the low frequency vibration of the manipulator by the advanced vibration suppression control II,
Shorten the time to complete the positioning, so as to achieve the production of the rhythm of the shortening . "4 axes, SSCNET III type.
2 axis /4 axis /3 axis linear interpolation.
2 axis interpolation.
Control unit: mm, inch, degree, pulse MITSUBISHI HC-SFS52K.
Location data: 600 data / axis.
40 pin connector.
Through the SSCNET III cable connection to save wiring, the distance between the station up to 50m .
Absolute position system for determining the origin position is supported by the return data set operation.
In addition, the limit switch of the upper limit, the lower limit switch and the near point block signal input can be directly connected to the servo amplifier,
Thus greatly reducing the wiring requirements.
Easy to achieve high speed, high precision positioning control.
Support for multiple types of positioning control,
Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..
In addition, can use the "Configurator-QP GX" and other software,
Easy to set, monitor and debug. "Max input / output points: 60 points.
Power supply voltage: DC24V.
Input points: 36 points.
Output points: 24 points.
Output type: transistor.
Power consumption (W): 35.
Weight (kg):0.8.
Size (WxHxD) mm:175x90x75.
FX1N series is a very powerful micro PLC, can be extended to up to 128 I/O points,
And can increase the special function module or the expansiion board .
Coommunication and data link function options make FX1N in the volume, communication and special function modules and other important applications is very perfect HC-SFS52K.
A PLC unit can output 2 100KHz pulses at the same time,
PLC is equipped wiithh 7 special positioning instructions,
Including zero return, absolute position readout, absolute or relative drive, and special pulse output control HC-SFS52K.
HC-SFS52K Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=HC-SFS52K&select=5