20 pin connector on both ends of the circular multi-core cable.
Length 1.5M. Power: 75kw.
Voltage: 200V.
The power factor of the input power factor is up to 0.99 and above (100% load).
Can be connected to multiple inverters, to achieve a common DC bus mode.
Equipped with standard power retrogradation function MITSUBISHI GT1030-LWDW. Superior high efficiency IPM motor.
Output power: 45kw.
Rated speed: 1500r/min.
Voltage level: 400V
GT1030-LWDW
IPM motor MM-EFS series can not be used to run the power frequency power.
The total wiring length of the IPM motor shall not exceed 100m.
1 inverters can not connect multiple IPM motors at the same time. Through a series of holes available to install FR-A800 using the original FR-A200 series MITSUBISHI GT1030-LWDW. Type: HA-SE series.
Rated output: 0.85KW.
Rated speed: 1000r/min.
Electromagnetic brake: No.
Control complex, easy to achieve intelligent,
The electronic commutation method is flexible and can be changed by square wave or sine wave.
Motor maintenance free, high efficiency, low operating temperature,
Electromagnetic radiation is very small, long life, can be used in a variety of environments MITSUBISHI GT1030-LWDW.
AC servo motor is brushless motor, which is divided into synchronous and asynchronous motor,
Synchronous machines are commonly used in motion control,
Its power range, you can do a lot of power.
Large inertia, the maximum rotation speed is low, and with the increase of power and rapid reduction.
So it is suitable for the application of low speed and stable operation.
The rotor of the servo motor is permanent magnet,
Drive controlled U/V/W three phase electric electromagnetic field,
The rotor rotates under the action of the magnetic field,
At the same time the motor comes with the encoder feedback signal to the drive,
According to the feedback value and the target value, the driver is compared,
Adjust the rotor rotation angle.
The accuracy of the servo motor is determined by the accuracy of the encoder. "MITSUBISHI inverter series: FR-A846.
Voltage level: three phase 400V.
Power: 75kw.
SLD converter rated current: 216A.
Structure and function: IP55 counterpart.
Type: CA.
Substrate coating: have.
Built in DC reactor.
Easy to operate, simple settings.
We have prepared a series of equipment and functions for you to work in any place to meet the life cycle of the product.
Allegedly, the motor power consumption accounted for about half of the total power generated by manufacturing industry consumption.
How to achieve energy efficiency in the plant without affecting the productivity.
Less energy consumption and more output FR-A800 series inverter will help you to have both fish and bear''s paw"
Parameters and frequency settings can be modified in the program.
Inverter control, for example, by the input signal to trigger the operation of the inverter, based onn the operation of the inverter
The status of the signal output, as well as the monitor output and so on, can be customized according to the requirements GT1030-LWDW.
The control of each machine can be done separately by the frequency converter, and the controol of the dispersion is also carried out GT1030-LWDW.
Through combining with the real-time clock function can realize the automatic operation (in option FR-LU08). "
GT1030-LWDW Operation manual/Instructions/Model selection sample download link:
/searchDownload.html?Search=GT1030-LWDW&select=5