Type: 18 point terminal.
Input / output mode: analog voltage and current output.
Number of channels: 4 channels.
No need to extend or change the network wiring to increase the number of analog points.
The conversion speed of the analog input module can be selected from 100 mu s/ channel, 400 mu s/ channel and 1ms/ channel MITSUBISHI FX-20P-CAB0-R. (switching speed switching function)
The conversion speed of the analog output module is 100 mu s/ channel FX-20P-CAB0-R
Can be connected to the analog input / output module (NZ2GF2BN-60AD4, NZ2GF2BN-60DA4) after the use of.
IE CC-Link field network remote equipment station. According to the equipment, more easily distributed input and output devices MITSUBISHI FX-20P-CAB0-R.
Can be connected to the expansion module, more convenient to expand the input and output points .
Support synchronous communication (using with simple motion control module).
According to the simple motion control module of the network (Master) control cycle of the implementation of the control cycle and its synchronization,
Implementation of multiple simultaneous action from the station MITSUBISHI FX-20P-CAB0-R. Power: 0.4kw.
Purpose: to suppress the power harmonics .
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Motor series: low inertia, medium power.
Rated output power: 55.0kw.
Rated speed: 2000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suiitable for flange (type) installation and support foot mounting FX-20P-CAB0-R.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesoolution ensures excellent performance and stability at low speed FX-20P-CAB0-R.
All motor dimensions are the same as before and all are compatible with the wiring.
FX-20P-CAB0-R Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=FX-20P-CAB0-R&select=5