LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
YASKAWA SGMGV-05DDA6E Door Switches SGMGV-05DDA6E
YASKAWA SGMGV-05DDA6E
SGMCS small capacity type of direct drive servo motor.
Rated torque: M \/ 14N.
Servo motor outside diameter size: 360mm.
Serial encoder: 20 bit absolute value type (absolute value of 1 circles) (standard).
Design sequence: the outer diameter size of the servo motor is marked as N and M.
Flange specification: face C, reverse load side YASKAWA SGMGV-05DDA6E.
Optional specifications: no matching.
Under the condition of no speed reducer, the load is directly driven SGMGV-05DDA6E
Can be realized from low speed to high speed of the strong smooth running
(instantaneous maximum torque: 6 ~ 600N \/ m, maximum speed: 250 ~ 500r\/min).
By using 20 bit high resolution encoder, the high precision can be carried out YASKAWA SGMGV-05DDA6E.
The use of hollow structure, convenient wiring and piping .
Use example:
Semiconductor manufacturing equipment.
Liquid crystal circuit board manufacturing equipment.
Various inspection and test equipment.
Electronic part packaging machine.
IC information processor.
IC inspection equipment.
A variety of automated machinery.
Robot。
Small capacity ratings and specifications:
Rated time: continuous YASKAWA SGMGV-05DDA6E.
Vibration level: V15 .
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: A.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP42 (except for the rotating part of the output shaft).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationHigh performance, use the best type of servo unit (purpose type).
Maximum applicable motor capacity: 6.0kw.
Power supply voltage: three phase AC400V.
Interface: MECHATROLINK-III communication command type (rotary servo motor).
Design sequence: A.
Hardware specifications: shelf installation type + paint.
Function: fixed point through output function.
Use the best type of sigma -V-FT series
According to different uses, there are 5 equipped with a convenient function of the servo unit models.
FT001 (vibration suppression function to upgrade specifications): by strengthening the vibration suppression function, shorten the positioning time.
FT003 (pressure feedback function): high precision pressure control, to promote the high performance of the device.
FT005 (support for rotary table purposes)): with the rotatiion of the coordinate function and fixed point through the output function, can be smooth and high-precision control of rotary table SGMGV-05DDA6E.
FT006 (fixed point through the output function): no need to pass through the upper device can bee sset through the output (Chu Fa) SGMGV-05DDA6E.
FT008 (absolute value system support): the absolute value of the system can be constructed by any upper controller.
SGMGV-05DDA6E Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGV-05DDA6E&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Rotary servo motor
SGMGV-05DDA2E
Yaskawa Rotary servo motor SGMGV-05DDA2E
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-03D3C61
Yaskawa Rotary servo motor SGMGV-03D3C61
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-05DDC2C
Yaskawa Rotary servo motor SGMGV-05DDC2C
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-75ADA2E
Yaskawa Rotary servo motor SGMGV-75ADA2E
Sigma -V series servo motor SGMGV. Rated