LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
YASKAWA Door Switches SGMAV-A5A3A6C
YASKAWA SGMAV-A5A3A6C
Servo motor type SGMPH (speed: 3000r/min).
Power: 0.75kw.
Power supply voltage: three phase AC200V.
Serial encoder: 13 bit relative value.
Design sequence: A.
Shaft end: straight shaft without key.
Optional parts: no brake oil seal.
Partial flat series: the need to install the servo motor in a small space YASKAWA Door Switches.
Flexible user system.
For you to build the best system to enrich the product line to support you SGMAV-A5A3A6C
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of YASKAWA Door Switches.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated . 。Servo motor SGMGH type.
Rated speed: 1000r\/min.
Power: 0.6Kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit relative value.
Design sequence: B YASKAWA Door Switches.
Shaft end: taper 1\/10, with parallel key.
Optional parts: with oil seal.
High speed feed series: high speed running when no load .
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain.
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number than the original product reduced by 1\/2.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed controlSigma -V series servo motor SGMGV.
Rated output: 4.4kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal, with the brake (DC24V).
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: fflange type .
Heat resistaance grade: F YASKAWA SGMAV-A5A3A6C.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% ((not dew) YASKAWA SGMAV-A5A3A6C.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMAV-A5A3A6C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMAV-A5A3A6C&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Ultra low inertia servo motor
SGMAV-A5ADABE
Yaskawa Ultra low inertia servo motor SGMAV-A5ADABE
Sigma -V series servo motor SGMAV. Rated
Yaskawa
Ultra low inertia servo motor
SGMAV-C2A3ABE
Yaskawa Ultra low inertia servo motor SGMAV-C2A3ABE
Sigma -V series servo motor SGMAV. Rated
Yaskawa
Ultra low inertia servo motor
SGMAV-04A3A6C
Yaskawa Ultra low inertia servo motor SGMAV-04A3A6C
Sigma -V series servo motor SGMAV. Rated
Yaskawa
Ultra low inertia servo motor
SGMAV-04A3A2C
Yaskawa Ultra low inertia servo motor SGMAV-04A3A2C
Sigma -V series servo motor SGMAV. Rated