LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
SGMGV-20DDA2B YASKAWA SGMGV-20DDA2B
YASKAWA SGMGV-20DDA2B
Sigma -V series servo motor SGMSV.
Rated output: 1.0kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal.
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake) YASKAWA SGMGV-20DDA2B.
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22) SGMGV-20DDA2B
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C YASKAWA SGMGV-20DDA2B.
Excitation mode: permanent magnet type .
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection YASKAWA SGMGV-20DDA2B.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationSigma -v series servo unit SGDV .
Maximum applicable motor capacity: 6kw.
Power supply voltage: three phase AC200V.
Design sequence: A type.
Interface: MECHATROLINK- II communication command type (linear servo motor).
Matching (hardware): shelf installation type + paint.
Realize real time communication.
The maximum transmission speed of 10Mbps and can be set to the communication cycle 250 s ~ 4ms,
Achieved a maximum of 30 stations in the high speed control. Through the high speed of communication,
Can send and receive all kinds of control information in real time.
Energy saving and high efficiency.
A maximum of 30 stations can be connected to the communication lines, can significantly reduce the wiring costs and time.
The command connector of the upper controlller only needs 1,,
Pulse generator for D/A converter or position instruction without speed / torque command SGMGV-20DDA2B.
High precision motion control is realized.
In addition to torque, position and speed control, but also to achieve high precision synchronizzattion phase control SGMGV-20DDA2B.
Because the control mode can be switched on line, the complicated mechanical action can be realized more effectively and smoothly.
SGMGV-20DDA2B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGV-20DDA2B&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Rotary servo motor
SGMGV-20ADA2E
Yaskawa Rotary servo motor SGMGV-20ADA2E
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-09D3C2D
Yaskawa Rotary servo motor SGMGV-09D3C2D
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-75ADA2S
Yaskawa Rotary servo motor SGMGV-75ADA2S
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-09ADC2S
Yaskawa Rotary servo motor SGMGV-09ADC2S
Sigma -V series servo motor SGMGV. Rated