The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.For RGB input USB cable to prevent disconnection (2 / set)Converting SIO to RS-422 terminal block4.3 Inch Touch Screen anti UV protective film (1 pieces).Suitable for A/B+ Type modelsMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine PFXZCDDS102 Price. Screen size: 5.7 inches.
Display type: monochrome LCD PFXZCDDS102
Display color: black and white (2 gray level) / black and white (8 gray level).
Backlight: CCFL (service life: more than 50000 hours, 24 hours of continuous work).
Resolution: 320 x 240 pixels.
Brightness control: 4 level adjustment can be carried out by touch panel PFXZCDDS102 Price.
Voltage: DC24V .
Internal memory: FLASH EPROM 2MB.
Backup memory: 256KB SRAM.
Interface: Ethernet, CF card. "Size: 5.7 inches.
Display type: STN pseudo color LCD.
Resolution: 320 x 240 pixels (QVGA).
Display color: 256 color (no flash) /64 color (3 speed flicker).
Power supply: DC24V.
Interface: USB (TYPE-A), RS-232C, RS-422/485 (MPI) PFXZCDDS102 Price.
Brightness adjustment: 8 level adjustment can be carried out by touch panel .
You can easily and intuitively set the address by dragging and dropping the mouse.
In addition, click on the use of the address can be displayed on the screen number and part number.
Click the part number to jump to the screen using the widget.
The same software supports all 3000 series of Pro-face man-machine interface.
From the screen to create the programming, the functions are simple and easy to use.
Learn a software, master all the skills.
Support efficient image creation.
ID management and operation log reduces downtime.
Improve the operation mode, reduce the cost and workload.
Analysis of failure causes according to the operation log.
Check register status on historical trend chart.
Drag and drop functionality makes the software interface easier to operate.
A variety of components to provide a variety of components, easy to create a beautiful picture.
In addition, there are a variety of 256 color components can be used.
Using the alarm log to quickly check and display the alarm message and register value, it is easier to find the cause of the fault.
Register value will be recorded when the alarm is issued.
Therefore, the state of the register and its value can be obtained while acquiring the alarm message.
A comparison of the data is helpful to find the cause of the fault.
These "sampple parts" can be used ddirectly, and the design time is greatly reduced Proface PFXZCDDS102.
According to ID number of easy access to the operation log, through the analysis of the operation to improve production efficiency.
Use ID based on the number of authorized moodee of operation, can be recorded when, who performed the operation Proface PFXZCDDS102.
Using this data, you can analyze the causes of all the faults that have occurred. "
PFXZCDDS102 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=PFXZCDDS102&select=5