LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
Proface PFXZGPCBCV2HR43
No PHOTO
Proface PFXZGPCBCV2HR43
GP2500S useInput voltage: DC24V.
Screen size: 5.7 inches.
Display type (resolution):65536 color TFT (QVGA 320 x 240 pixels).
Touch panel type: analog resistance.
Memory: 8MB (internal memory), SRAM128KB (backup memory).
Ethernet interface: 1.
Serial port: RS-232C * 1, RS-422/485 * 1.
SD card slot (max 32GB):1 Proface .
USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1.
Replaceable battery: no (rechargeable battery) PFXZGPCBCV2HR43
Alarm analysis function block: No.
Panel opening size:
Wide 156 x high 123.5mm (+1/0mm).
Panel thickness: 1.6-5mm, chamfer radius is less than R3.
Coating models: there.
Easily connect a variety of USB devices
Can be easily connected to the man-machine interface serial controller, EZ series accessories, bar code reader and USB memory Proface .
Remote data acquisition and management
Human machine interface, which is installed on the production machine,
With EX Microsoft software combined with Office Pro-Server and SQL and other standard PC software,
Can be simple and economical to establish a set of data management system, and effectively improve the quality of production and efficiency Proface . 7.4 inches, replace the backlight (1 / set)Disposable battery (1 blocks) for backing up clock data.12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.Output points: 16 point relay (a-connect).
Rated output voltage.
External connection: 10 pin terminal connector.
Public end design: 4 point /1 public end. I/O expansion module, including the 8 point relay /1 public endDisplay size: 3.8 inches.
Display type: monochrome LCD.
Display color: black and white (2 gray level) / black and white (8 gray level).
Backlight: LED backlight.
Resolution: 320 x 240 pixels.
Brightness control: 2 level adjustment can be carried out by touch panel.
Contrast control: 8 level adjustment can be carried out through the touch panel.
Memory: EPROM 640KB FLASH.
Serial port: RS-232C/422.
Ethernet port: 10BASE-T. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface"Size: 3.8 inches.
Display type: monochrome (amber / red) LCD.
Resolution: 320 x 240 pixels (QVGA).
Display color: monochrome (8 gray level).
Power supply: DC24V.
Interface: USB (host), RS-232C, MPI.
Backlight: amber / red LED (users can not change their own. Must be replaced by the manufacturer. ).
Brightness adjustment: 16 level adjustment can be carried out by touch panel.
Learn a software, master all the skills.
Support efficient image creation.
ID management and operation log reduces downtime.
Improve the operation mode, reduce the cost and workload.
Analysis of failure causes according to the operation log.
Check register status on historical trend chart.
Drag and drop functionality makes the software interface easier to operate.
A variety of components to provide a variety of components, easy to create a beautiful picture.
In addition, there are a variety of 256 color components can be used.
Using the alarm log to quickly check and display the alarm message and register value, it is easier to find the cause of the fault.
Register value will be recorded when the alarm is issued.
Therefore, the state of the register and its value can be obtained while acquiring the alarm message.
A comparison of the data is helpful to find the cause of the fault.
These "sample parts" can be used directly, and the design time is greatly reduced.
According to ID number of easy access to the operation log, through the analysis of the operation to improve production efficiency.
Use ID based on the number of authorized mode of operation, can be recorded when, who performed the operation.
Using this data, you can analyze the causes of all the faults that have occurred.
You can eassily and intuitively set thee address by dragging and dropping the mouse Proface PFXZGPCBCV2HR43.
In addition, click on the use of the address can be displayed on the screen number and part number.
Click the part number to jump to the screen using the widget.
The same softtwaare supports all 3000 series of Pro-face man-machine interface Proface PFXZGPCBCV2HR43.
From the screen to create the programming, the functions are simple and easy to use. "
PFXZGPCBCV2HR43 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=PFXZGPCBCV2HR43&select=5


...more relevant model market price >>>>
Related products