Motor: HA-LH type.
Power: 7.0kw.
Speed: 2000r/min.
According to the types of power supply: can be divided into DC motor and AC motor.
The structure and working principle of DC motor can be divided into four parts: brushless DC motor and brushless DC motor.
Brushless DC motor can be divided into: permanent magnet DC motor and DC motor MITSUBISHI MR-J3-10A1.
DC Motor Division: Series DC motor, DC motor, DC motor and DC motor MR-J3-10A1
Permanent magnet DC Motor Division: rare earth permanent magnet DC motor, ferrite permanent magnet DC motor and aluminum nickel Gu Yongci DC motor. Max input / output points: 14 points.
Power supply voltage: DC24V.
Input points: 8 points MITSUBISHI MR-J3-10A1.
Output points: 6 points.
Output type: transistor.
Power consumption (W): 32 .
Weight (kg):0.4.
Size (WxHxD) mm:90x90x75.
FX1N series is a very powerful micro PLC, can be extended to up to 128 I/O points,
And can increase the special function module or the expansion board.
Communication and data link function options make FX1N in the volume, communication and special function modules and other important applications is very perfect MITSUBISHI MR-J3-10A1.
A PLC unit can output 2 100KHz pulses at the same time,
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute position readout, absolute or relative drive, and special pulse output control . Motor series: medium inertia, medium power.
Rated output power: 1.5kw.
Rated speed: 2000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Protection level: IP65 (IP67).
Features: medium inertia from low speed to high speed three modes for selection, suitable for different applications.
Application examples: transmission machinery, robots, X-Y working platform.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. MR-J2M multi axis servo amplifier substrate.
Groove position: 4.
The comparison is to comparee the input commmand signal with the feedback signal of the system in order to obtain the deviation signal between the output and the input,
Usually implemented by a dedicated circuit or computer MR-J3-10A1.
The controller is usually a computer or PID control ciircuit, and its main task is to transform the deviation signal from the output of the comparator,
To control the execution of components as required MR-J3-10A1.
MR-J3-10A1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-J3-10A1&select=5