Max input / output points: 16 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 8 points.
Output type: Transistor (source).
Power consumption: 20W.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x87.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter MITSUBISHI MR-J2S-700CP.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module MR-J2S-700CP
A total of 8 special function modules can be configured for each FX2n main unit.
Note recording function, Component annotation can be recorded in the program register MITSUBISHI MR-J2S-700CP.
Online program editor, online change the program will not lose the working hours or stop production operation .
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program MITSUBISHI MR-J2S-700CP.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard .
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017). Operation control mode: stored procedure repeated operation.
Input / output points: 4096 points.
Program capacity: 320K.
As the core of the programmable controller control system, programmable controller CPU module has been equipped with a variety of functions,
Support multiple controls. Program capacity from the 40K step to the 1200K step, to select the most suitable system size of the CPU module.
And the CPU module can be directly connected to the industrial network, which can reduce the construction cost of the system.
Standard interface.
The programmable controller CPU module has standdard Ethernet port, USB port, SD card slot MR-J2S-700CP.
Ethernet port and USB port can be used to communicate with the corresponding peripheral devices,
SD memory card slot can be used to record data, databases and other data storage.
In additiionn, the expansion of the SRAM card can be used for the expansion of the capacity of the soft element / tag memory and used as a hardware security key MR-J2S-700CP.
MR-J2S-700CP Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-J2S-700CP&select=5