Encoder adapter kit. Used in HF-JP11K1M, 15K1M, 11K1M4, 15K1M4Power: 75kw.
Voltage: 200V.
Sine wave filter.
The voltage and current of the motor can be adjusted to a sine wave.
The sine wave filter is installed to the output terminal of the inverter.
Applicable to FR-A820-03800 (75K) above and FR-A840-02160 (75K) and above frequency converter MITSUBISHI .
Sine wave filter is equivalent to the operational characteristics of the sine wave power driver, can provide the following benefits HA-ME43
Low noise.
No surge current.
Reduce motor loss (standard motor). MITSUBISHI inverter FR-F740 series.
Voltage level: three phase 400V.
Frequency converter capacity: 500KW MITSUBISHI .
The main circuit of the inverter can be divided into two categories in general: voltage type is the voltage source of the DC converter for AC inverter,
The filtering of the DC circuit is the capacitance; the current mode is the DC conversion of the current source to the AC inverter,
The DC loop filter is the inductor .
Why is the frequency of the inverter voltage proportional to the change?
The electromagnetic torque of any motor is the result of the interaction between the current and the magnetic flux, the current is not allowed to exceed the rated value, otherwise it will cause the heating of the motor MITSUBISHI .
Therefore, if the magnetic flux decreases, the electromagnetic torque will decrease, which leads to the reduction of the load carrying capacity. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Type: MR-J series.
Rated output: 0.1KW.
Suitable for motor series: HA-ME.
Voltage: three phase AC220V.
It is very helpful to improve the stability of the low speed control of the servo motor.
But there is no direct effect to improve the accuracy of position control.
There are, of course, software compensation that is similar to pitch compensation,
Can improve the physical resolution of the single lap, so as to improve the accuracy of positioning control.
This can be effectively used in the use of the robot contrrol of the indexing table MITSUBISHI HA-ME43.
It is also because of the application of splicing technology,
The rotary encoder will be more widely used in the high precision servo control in the harsh environment.
The use of rotary encoder with 2224/ in the servo motor has been used in the servo motor MITSUBISHI HA-ME43.
Encoder serial communication system, the communication frequency can only be limited to 10M.
HA-ME43 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=HA-ME43&select=5