Protective film for 5.7 inch screen.
Scrub, 5.
Applicable model: GT105. Can use the encoder to perform vector control.
Combined use of the position detector (PLG) with the position of the main shaft of the working machine,
Can be carried out on the position of the spindle stop (directional) control.
The speed is kept constant through feedback motor rotation speed MITSUBISHI HG-JR11K1M4B. CC-Link interface module.
PLC FX can be used as the CC-LINK remote device station connection HG-JR11K1M4B
If using CC-LINK type FX2N-16CCL-M system master module,
So just PLC CC-LINK can build FX system. Servo motor series: medium inertia, medium power.
Rated output: 7 MITSUBISHI HG-JR11K1M4B. 0kw.
Rated speed: 2000r/min.
Electromagnetic brake: No.
Shaft end specification: Standard (straight axis) .
Characteristics: medium inertia has two types of low speed and high speed, suitable for different applications.
IP level: IP67.
Application example:
1, material handling system.
2, industrial robots.
3, X-Y working table.
The protection level of the HF-SP/HF-JP series servo motor is IP67 (except the shaft part) MITSUBISHI HG-JR11K1M4B.
Motor capacity selection soft (MRZJW3-MOTSZ111E)
Friendly interface design, only in the mechanical description window input constant and operation mode can choose the best servo amplifier,
The servo motor and the regenerative braking options, but also in the selection window in the selection of linear servo motor and direct drive motor .
Characteristic
(1) 10 typical mechanical transmission structure can be used to choose
(2) user defined operating modes (location and speed control)
(3) in the selection process, the feed speed and torque can be displayed in a graphical format.
(4) the calculation process can be displayed
Can easily calculate the power of the servo motor free software!Speed of delivery: optional 156kbps/625kbps/2.5Mbps/5Mbps/10Mbps.
Connect up to 64 sets of units.
Security PLC (secure programmable system) refers to the self or external components or the implementation of the failure of the agency,
Can still respond to and promptly cut off the output of the programmable system.
Different from ordinary PLC, security PLC not only can provide the function of ordinary PLC,
Safe control function can be realized,
Meet the requirements of the ISO 13849-1 EN and IEC 61508 control system safety related component standards.
PLC security market mainstream has oilz (Pilz) PSS 3000, PSS 4000,
PSS 4000 in addition to the security process can also bee processed outsiide the standard control procedures HG-JR11K1M4B.
All the components in the security PLC adopt the redundancy structure,
Two processor processing for cross detection,
The processing results of each processor are stored in their respective memoryy,

Output is only when the processing result is in full agreement,
If any inconsistency occurs during the process, the system is immediately shut down HG-JR11K1M4B.
HG-JR11K1M4B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=HG-JR11K1M4B&select=5