Contact type: Silver plated.
Terminal specification: right angle terminal.
Straight rod type: terminal leaf Shibai.
Super small (6.5 x 8.2 x width depth of high quality 2.7mm) only 0.3g speed switch
Although it is super small, but with fast moving structure, good electrical characteristics.
Contact with gold plated contacts for silver plated contacts and small loads A22TK-2LL-01-09.
Can be used in small audio equipment, optical equipment, communication equipment, etc A22TK-2LL-01-09.
A place of high demand and high reliability. Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Resistance Thermocouple Input Units.
points Input: 8 inputs A22TK-2LL-01-09.
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100 .
Conversion speed (resolution):
250 ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices A22TK-2LL-01-09.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value .
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Input type: DC voltage input type.
Output type: communication; RS-232C; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models arre not equipped with .
Thhe most suitable voltage and current signal simulation, measurement and display, identification of the panel table OMRON A22TK-2LL-01-09.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub preesssure gauge for monitoring the operation trend OMRON A22TK-2LL-01-09.
External event input can be applied to a variety of measurement and identification situations.
Device
A22TK-2LL-01-09 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A22TK-2LL-01-09&select=5