Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement OMRON D4D-5562N.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) D4D-5562N
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Operation indicator: Without operating indication; Standard load OMRON D4D-5562N.
Ratings: 5 A at 250 VAC; 4 A at 30 VDC.
Actuator: Roller lever (high sensitivity model) .
Cable length : 5m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material OMRON D4D-5562N.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.) Classification: High-sensitivity.
Contact gap: H (0.25 mm).
Actuator: Low force wire hinge lever; Low OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is availlable .
A serries of molded terminal-type models incorporating safety,
terminal protective cover is available D4D-5562N. Appearance: Shielded, M12.
Sensing distance: 3 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tiighhtening strength D4D-5562N. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
D4D-5562N Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4D-5562N&select=5