Actuator: Roller plunger.
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 2NC/1NO (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement OMRON CPM1A-30CDT1-D-V1.
Standardized gold-clad contacts provide high contact reliability CPM1A-30CDT1-D-V1
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Actuator: General purpose; Roller plunger; AC OMRON CPM1A-30CDT1-D-V1.
Mounting: Side mounting.
Approved standards: UL CSA.
General-purpose Enclosed .
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series OMRON CPM1A-30CDT1-D-V1.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available .
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)E32-L16 type: special beam type; liquid level detection,
Specialty: the detection range of the detection location is scattered less than 0.2mm,
Bending radius (mm): R25.
Fiber element for meeting diversified needsType: Standard type.
Enclosure: surface type.
30 years of best-selling products new upgrade in the reservation,
Based on the basic functions to achieve a compact.
The installation dimensions of the surface type remain unchanged, the volume ratio of the volume ratio of the square body is reduced,
Half. (excluding AGD-U2)
Built in digital filter to reduce the impact of high frequency interference, to achiieve a higher accuracyy,
Leakage monitoring CPM1A-30CDT1-D-V1.
The output point consists of 1c1a * monitoring circuit, an external signal based on contact,
Remote monitoring and alarm output of each monitoring circuit.
Cube embedded type also built-in buzzer. (exceptt AAGD-U2) alarm output,
Optional external buzzer CPM1A-30CDT1-D-V1.
After the upgrade of all products can choose automatic reset, manual reset.
(AGD-N5, AGD-NY5, AGD-N52)
CPM1A-30CDT1-D-V1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=CPM1A-30CDT1-D-V1&select=5