LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
OMRON A22RL-TR-24A-10M A22RL-TR-24A-10M
No PHOTO
OMRON A22RL-TR-24A-10M
Type: 1a1b welding terminal.
Shape: square.
Type: General load.
Action: instantaneous action (auto recovery).
With light: LED with light.
Using voltage: DC24V.
Operation Department color: white.
20mm long, with 12 round series
High brightness all one side light.
Because it is round, so easy to punch OMRON A22RL-TR-24A-10M.
Miniaturization, operation feel good. E32-VF44CH flangeName: Clamp Terminal Blocks.
Specifications: Inputs; 16 inputs ; PNP; -- A22RL-TR-24A-10M
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system OMRON A22RL-TR-24A-10M.
A wide variety of CompoNet Slave Units,
contribute to system size reduction .
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: Temperature Controller (See note 1.).
Power supply: 24 VDC OMRON A22RL-TR-24A-10M.
No. of control points: 2.
Control output: Transistor output.
Auxiliary output: Transistor output: 2 pts (sinking) .
Functions: Heater burnout alarm (See note 3.), Heating or heat/cool,
control is selectable (See note 4.)Event input: 1 point per Unit.
Communications functions: RS-485.
Input type (See note 5.): Thermocouple.
New DIN Track Mounting Temperature.
Controller.
Two channels of temperature control available despite width of,
only 22.5 mm.
The Temperature Controller itself can be replaced without,
changing terminal wiring.
Use in combination with a compact Setting Display Unit to,
reduce communications programming requirements.
Front-panel LED indicators for easy operation monitoring.
Power supply and communications wiring not required between,
Units when mounted side-by-side.
CompoWay/F communications protocol supported.
UL, CSA, and CE Marking compliance. Time specification: Instantaneous type.
Current setting range: 8 to 26 A.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation A22RL-TR-24A-10M.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions A22RL-TR-24A-10M. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
A22RL-TR-24A-10M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A22RL-TR-24A-10M&select=5


...more relevant model market price >>>>
Related products
OMRON
Pushbutton Switch
A22L-GW-24A-10M
OMRON Pushbutton Switch A22L-GW-24A-10M
Appearance: Round/Full-guard type LED li
OMRON
Pushbutton Switch
A22L-CA-24A-10M
OMRON Pushbutton Switch A22L-CA-24A-10M
Appearance: Square/Projection type LED l
OMRON
Pushbutton Switch
A22L-GY-24A-10M
OMRON Pushbutton Switch A22L-GY-24A-10M
Appearance: Round/Full-guard type LED li
OMRON
Pushbutton Switch
A22L-CY-24A-10M
OMRON Pushbutton Switch A22L-CY-24A-10M
Appearance: Square/Projection type LED l