Name: e-CON Connectors.
Specifications: Outputs; 32 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system A165W-A3MG Price.
A wide variety of CompoNet Slave Units,
contribute to system size reduction A165W-A3MG
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error A165W-A3MG Price. Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1 .
Actuator: Sealed pin plunger.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material A165W-A3MG Price.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Output: DPDT.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 100/110 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads aand microloads .
Eassy-to-wire terminal arrangement OMRON A165W-A3MG.
Certified for EN 60947-5-1. Specification: Resin, different end diameter.
Shaft interior (tolerance *) exterior dia: 6 dia. 10 dia. (Height: 8), 22 dia.
Couplings.
Coupling Materials and Charaactteristics OMRON A165W-A3MG.
OMRON provides two types of couplings for different.
application conditions: Resin and metal.
Select the best type for the application.
A165W-A3MG Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A165W-A3MG&select=5