Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: HH; PASS1c, H, L, LL: each 1a.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified C500-AD007
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurementOperating modes: Flicker OFF start OMRON C500-AD007.
Supply voltage: 100 to 240 VAC/100 to 125 VDC, 24 to 48 VAC/12 to 48 VDC.
0.05 s to 300 h models: 11-pin models.
DIN 48 × 48-mm Twin Timers.
Wide power supply ranges of High Voltage 100 to 240 VAC/100,
to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC.
ON- and OFF-times can be set independently and so,
combinations of long ON- or OFF-time and short OFF- or ON,
time settings are possible OMRON C500-AD007.
Twenty-four time ranges from 0.05 s to 300 h depending on the,
model to be used.
Models with a flicker ON start or flicker OFF start are available.
Easy sequence checks through instantaneous outputs for a,
zero set value at any time range.
Length, when panel-mounted with a Socket, of 80 mm or less.
11-pin and 8-pin models are available. Appearance: Cylindrical (flat surface installation).
Sensing distance: 100 mm.
Output configuration: Current output.
Detection Distance of 100 mm for.
Both Ferrous and Non-ferrous.
Substances.
Ultra long-distance detection of 100 mm for both ferrous and,
non-ferrous substances.
Models also available for use under water. Type: printing plate mounting type, with right column.
Drive rod: needle shaped button type.
Terminal specification: printed board, angular.

Contact speciffications: 1c C500-AD007.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used fforr easy long stroke specifications (OT reference value: 1 C500-AD007. 4mm).
Without harmful substances to the environment, the lead type has also been lead-free.
C500-AD007 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=C500-AD007&select=5