Appearance: Knob-type Selector Switch A22W,
LED voltage-reduction lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Manual.
Output: SPST-NO.
Operating voltage: 100 VAC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia MK3P2-I AC12. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature MK3P2-I AC12
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models) MK3P2-I AC12.
IP65 (lighted models). Unit type: CS1 Special I/O Units .
Name: High speed Counter Units.
Specifications: Countable channels,
2; Encoder A and B inputs,
pulse input Z signals, Open collector,
Input voltage: 5VDC,12VDC, or 24VDC,
(up to 2 axes for 5 V or 12 V input),
RS-422 line driver;
Max. counting rate, 50kHz, 500kHz.
No. of unit numbers allocated: 4.
Current consumption: 5V, 0 MK3P2-I AC12. 45A; 26V, --.
Standards: UC, N, L, CE.
High-Speed, Flexible Control With A,
Wide Array of Features .
Equipped with 2 or 4 Counters and counts,
over a maximum binary range of 32-bits.
Accepting input pulse frequencies of up,
to 500 kHz allows precise control of fast motions.
The Unit is equipped with 4 Digital Inputs,
4 Digital Outputs and 28 Soft Outputs.
A maximum response time of 0.5 ms guarantees,
high-speed closed loop control of applications. Unit classification: CJ1 CPU Bus Unit.
Product name: SPU Unit,
(High-speed Data Storage Unit).
Specifications:PC Card slot,
CF Card Type I/II × 1 slot,
Use an OMRON HMCEF@@@Memory Card;
Ethernet (LAN) port,
1 port(10/100Base-TX).
No. of unit numbers allocated: 1.
Current consumption: 5V , 0.56A;
24V, --.
Standards: UC1, CE.
High-speed Collection of System Data,
The CPU Unit can collect large amounts,
of process data, operation data,
inspection data, and other controlled,
system data quickly and automatically,
save the data in external storage,
media as CSV files. Cable length: 3 m.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power .)

Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor OMRON MK3P2-I AC12.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settingss . OMRON MK3P2-I AC12.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.
MK3P2-I AC12 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MK3P2-I AC12&select=5