Round Indicator Series with 22 dia. and.
25 dia. (when using a ring).
Same type as the A22-series Pushbutton Switches.
Use 25-dia. ring to install in 25-dia. panel cutouts.
IP65. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NO.
Chip-immune Inductive M2PT-90A12-24CR.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor M2PT-90A12-24CR
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. Name: Temperature Controller (See note 1.).
Power supply: 24 VDC.
No. of control points: 2.
Control output: Voltage output (for SSRs) M2PT-90A12-24CR.
Auxiliary output: Transistor output: 2 pts (sinking) .
Functions: Heater burnout alarm (See note 3.), Heating or heat/cool,
control is selectable (See note 4.)Event input: 1 point per Unit.
Communications functions: RS-485.
Input type (See note 5.): Platinum resistance thermometer.
New DIN Track Mounting Temperature.
Controller.
Two channels of temperature control available despite width of,
only 22 M2PT-90A12-24CR. 5 mm.
The Temperature Controller itself can be replaced without,
changing terminal wiring .
Use in combination with a compact Setting Display Unit to,
reduce communications programming requirements.
Front-panel LED indicators for easy operation monitoring.
Power supply and communications wiring not required between,
Units when mounted side-by-side.
CompoWay/F communications protocol supported.
UL, CSA, and CE Marking compliance. E32-D21R type: standard type; soft (new standard),
Specialty: M3 screws (small),
Bending radius (mm): R; R1.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsDecision circuit, sensor power supply, the integration of the same period and linear sensor combination is easy to use.
4-20mA analog input, PASS/NG determine the output.
Large capacity sensor power supply, 200mA DC12V power abundant.
Built in synchronization input function.
30mm super wide. Actuator: One-way roller arm lever (horizontal).
Conduit size: 1-conduit; M12 connector.
Built-in switch mechanism: 2NC (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three coontact models with 2NC/1NOO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC OMRON M2PT-90A12-24CR.
M12-connector models are available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reeliability OMRON M2PT-90A12-24CR.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC.
M2PT-90A12-24CR Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=M2PT-90A12-24CR&select=5