Release Key Type: Special (resin).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @ OMRON MKS2PIN-D-2 DC100.
Conduit size (See Note.): M20.
World''s smallest Class 6-contact Guard Lock MKS2PIN-D-2 DC100
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices OMRON MKS2PIN-D-2 DC100.
(4-, 5-, and 6-contact models are available) .
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames OMRON MKS2PIN-D-2 DC100.
The plastic material makes the Slide Key suitable,
for lightweight doors . Connects SYSMAC LINK Unit, Controller Link Unit to CPU Unit.
For 1 Unit.E3JK-5S3 detection methods: the firing pattern,
Connection mode: lead wire,
Detection range: 5m.
Output state: when the light into the ON; light shading ON.
Output: DC no contact,
2 types of cost reductionProduct name: Logging unit.
Power supply: Battery/DC cable.
Easy and Quick "Checking Power"at the Worksite. Output: SPDT.
Lighting: Non-lighted.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; B: black *2.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Thermocouple type: J (IC).
Heat resistance: heat resistant.
Outside: all glass fiber outer wrapping stainless steel shielding layer.
Compensating wire llength: 1 m .
A varietty of high precision temperature sensor series MKS2PIN-D-2 DC100.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a theermmostat MKS2PIN-D-2 DC100.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.

MKS2PIN-D-2 DC100 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MKS2PIN-D-2 DC100&select=5