Model: A7BS.
Classification (See note 1.): Snap-in (front mounting), With external stoppers.
Character height: Decimal: 4.8 mm.
Terminals: Solder terminals *1.
Color: Light gray.
Output code number: 06 (binary coded decimal).
Wide Range of Locking-type.
Models Available.
Character height of 4 OMRON M2BJ-BH24D-DA. 8 or 3.2 mm makes for easy-to,
view display.
Installation is easy with snap-in mounting.
The series includes a complete range of locking-type,
models that prevent accidental operation M2BJ-BH24D-DA Size: M12, Non-shielded.
Sensing distance: 8.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 56 (72) OMRON M2BJ-BH24D-DA.
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater .
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization OMRON M2BJ-BH24D-DA. Terminal: Screw terminal (-B).
Actuator: Low-force hinge lever .
Direct Current Switch with.
Built-in Magnetic Blowout.
Incorporates a small permanent magnet in the contact.
mechanism to deflect the arc to effectively extinguish it.
Same shape and mounting procedures as the Z Basic Switches. Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 2 notches.
Resetting method: Manual.
Output: SPST-NO + SPST-NC.
Operating voltage: 6 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: AC load.
Zero cross function: Yes.
Rated input voltage: AC 100V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals . M2BJ-BH24D-DA.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also sttocked to meet the screw type needs M2BJ-BH24D-DA.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.
M2BJ-BH24D-DA Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=M2BJ-BH24D-DA&select=5