Action indicator: there are.
Applicable load of output: AC100 5A ~ 240V.
Input rated voltage: DC5 ~ 24V.
Insulation: photo coupler.
Zero crossing trigger function.
Socket terminal type with same shape as MK type power relay.
New international standard certification (-VD type).
Achieved UL, CSA, EN (VDE certification) standard certification OMRON H3Y-2-C AC110V 3M. (type -VD)
Socket terminal type of same size with MK (2 pole type) H3Y-2-C AC110V 3M
A model with an action indicator to check the status of the input. Name: Small reflector.
Directional angle: 30° min.
Ambient operating temperature range: -25 to 55°C.
Ambient storage temperature range: -40 to 70°C OMRON H3Y-2-C AC110V 3M.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 95% .
Degree of protection: IEC IP67.
Accessories: --. Appearance: Square/Projection without Voltage Reduction Unit M22-C.
Lighting: LED.
Operating voltage: 6 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Round Indicator Series with 22 dia OMRON H3Y-2-C AC110V 3M. and.
25 dia. (when using a ring).
Same type as the A22-series Pushbutton Switches.
Use 25-dia . ring to install in 25-dia. panel cutouts.
IP65. Appearance: insert type.
Control supply voltage: DC24V.
Action elements: overload detection.
Action characteristic: anti time limit action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc., are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple. Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated ffrom the start of operation H3Y-2-C AC110V 3M.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions H3Y-2-C AC110V 3M. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
H3Y-2-C AC110V 3M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=H3Y-2-C AC110V 3M&select=5