Number of notches: 3 notches.
Output: DPDT.
Reset method: Manual.
Key release position: Center.
Separate Construction with Cylindrical.
16-dia. Body.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models. High performance price ratio standard type proximity sensor OMRON .
Standard cable protector.
The new DC two-wire type NT20S-ST168B
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: shield, M18.
Detection range: 5mm.
Output configuration: NPN.
Action mode: NO. Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver) OMRON .
Sensing distance: 5 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor .
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible OMRON .
Large indicators that can be seen even from a,
distance .
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Lock method: Solenoid lock.
Conduit size: G1/2.
Voltage for solenoid: 24 VDC.
Without indicator 2NC+ 1NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-cast body incorporating a switch box with,
deegree of protection satisfying IP67, UL, and CSA TYPE6P, 13 OMRON NT20S-ST168B.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available OMRON NT20S-ST168B.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
NT20S-ST168B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=NT20S-ST168B&select=5