Contact type: Standard load (250 VAC, 2 A; 125 VDC 0.4 A).
Operation: Alternate operation (Self-holding).
Output: DPDT.
Lighting: LED, 12 VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton
n @. R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with OMRON H3Y-4 AC200-230 10M.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation H3Y-4 AC200-230 10M
Easy panel mounting from the front and simple lamp replacement.
without tools. Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON H3Y-4 AC200-230 10M.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC OMRON H3Y-4 AC200-230 10M.
Contact your OMRON representative for information on approved models. Actuator: Adjustable roller lever, form lock (metal lever, rubbe roller) .
Conduit size: 1-conduit; M12 connector.
Built-in switch mechanism: 1NC/1NO MBB(Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Input type: DC current input.
Output type: communication; RS-232C; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models arre not equipped with .

The most suitable voltage and current signal simulation, measurement and display, identification of the panel table H3Y-4 AC200-230 10M.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub preesssure gauge for monitoring the operation trend H3Y-4 AC200-230 10M.
External event input can be applied to a variety of measurement and identification situations.
Device
H3Y-4 AC200-230 10M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=H3Y-4 AC200-230 10M&select=5