Analog I/O terminal with screw terminal,
block for EtherCAT communicaitons.
The input/output range can be easily,
changed by the setting with the switch.
Detachable screw terminal block,
facilitates the maintenance.
Moving average calculation function.
Settings within the range of 100μs-64ms.
(For input only OMRON Z-01H-B. )
Disconnection detection function.
(For input only and for usage with,
1-5V or 4-20mA ranges Z-01H-B)
Selectable node address setting methods:
setting with rotary,
switch and with tool software.
When setting the nodes with rotary switch,
setting is easy and node identification,
becomes possible for maintenance OMRON Z-01H-B. Actuator: Roller plunger (Metal roller).
Cable length: 3 m.
Pull-outing direction of cable: Horizontal .
Built-in switch: 4NC (slow-action).
Smallest Class of Safety Limit Switches the World.
The world''s smallest limit switch with a direct opening,
mechanism (four-contact construction model).
High-sensitivity safety limit switch.
Built-in switches with two- or four-contact construction are available OMRON Z-01H-B.
Degree of protection: IP67.
Conforms to EN115-1, EN81-1 and EN81-2 .
(slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Structure: single stable type.
Contact structure: 1a.
Structure: high flux protection.
Coil rated voltage: DC24V.
Voltage resistant 10kV 1 pole 3A open close small relay.
High power electromagnetic loop is used to achieve high sensitivity (200mW).
Small relays, but can ensure the impact resistance of 10kV. Actuator: Roller lever (Metal lever, resin roller).
Cable length: 1 m.
Pull-outing direction of cable: Horizontal.
Built-in switch: 2NC/2NO (slow-action).
Smallest Class of Safety Limit Switches the World.
The world''s smallest limit switch with a direct opening,
mechanism (four-contact construction model) .
HHigh-sensitivity safety limit switch Z-01H-B.
Built-in switches with two- or four-contact construction are available.
Degree of protection: IP67.
Conforms to EN115-1, EN81-1 and EN81-2.
(slow-action models only).
Certified standards: UL, EN (TTÜV), and CCC Z-01H-B. Special resin mounting sleeves: Four different models available.
Simply select the size that fits the outside diameter of the Sensor.
Z-01H-B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=Z-01H-B&select=5