Type: rectangle.
Screen mode: no segmentation.
Light way: incandescent lamp.
Power supply voltage: 6V.
Operation Department color: yellow.
Square 40mm body of the indicator light series.
The same type as the A3S series button switch.
Easy to install from the front panel and no tools to carry out the lamp replacement OMRON SGE-245-0-2240L 05000C-05000C. Category: relay output.
Points: 8 points (1a * 8).
Common line processing on the connector side: corresponding (+ public) SGE-245-0-2240L 05000C-05000C
Rated voltage: DC24V.
To achieve the control cabinet of miniaturization / save time,
Relay terminal for 8 point output.
Small size of 136 * high 80 * 55mm OMRON SGE-245-0-2240L 05000C-05000C. (vertical installation)
The total wiring of the connector cable is realized.
The common end can be easily connected with the independent contact and the short circuit piece .
The G70D-SOC08 and G70R-SOC08 are connected by a short circuit chip.
When the relay does not need the tool, the relay is convenient to replace the work.
With terminal cover to prevent electric shock OMRON SGE-245-0-2240L 05000C-05000C.
Diode for internal coil surge absorption.
DIN guide rail installation, screw mounting common. E32-L25 type: special light beam type; limited reflection,
Features: small difference; high side function,
Bending radius (mm): R25 .
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsControl power supply voltage: 24 VDC.
Input: DC, Input voltage range, 0.2 to 12 V.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL).
Detect three-phase AC current for under and/or overcur,
rent using current converter.
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verse current detection.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F).
LED operation indicator.
UL/CSA approval (SDV-F@). Type of input: AC current input.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not eqquipped with .
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table SGE-245-0-2240L 05000C-05000C.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gaaugge for monitoring the operation trend SGE-245-0-2240L 05000C-05000C.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet type
SGE-245-0-2240L 05000C-05000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-245-0-2240L 05000C-05000C&select=5