Sensing method: Through-beam type.
Sensing distance(slot width): 5 mm.
Output type: NPN output.
Output configuration: Dark-ON.
Cable length: 1 m.
Photomicrosensor with built-in,
amplifier and attached cable reduces,
external light interference.
Light modulation effectively reduces external light interference OMRON SGE-125-0-0940 01000C-05000C.
Wide operation voltage range: 5 to 24 VDC.
Easy operation monitoring with bright light indicator SGE-125-0-0940 01000C-05000C Contact type: Microload (125 VAC, 0.1 A; 30 VDC 0.1 A).
Operation: Momentary operation (Self-resetting).
Output: SPDT.
Lighting: Incandescent lamp, 28 VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton,
in @@ OMRON SGE-125-0-0940 01000C-05000C. R (Red); Y (Yellow); G (Green); A (Blue); W (White) .
Pushbutton Switch Series with.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation.
Easy panel mounting from the front and simple lamp replacement.
without tools. Actuator: Bevel plunger.
Type: Limit.
Operation Indicator: Provided OMRON SGE-125-0-0940 01000C-05000C.
Repeat accuracy: 3 µm max.
Operating force OF max: 3.92 N.
Cable lead outlet: Lead outlet, Pre-wired; Length, 3 m .
Degree of protection: IP67.
High-precision Switch for Detecting Micron-unit,
Displacement.
Ideal for detecting and measuring wear of cutting,
tools or for original point of work.
Ceramic plungers on M5, M8, and slim models for,
superior abrasion resistance and resistance to,
temperature changes.
Direct input possible to microprocessors and,
programmable controllers.
A version with screw-type cable connector available,
for easy installation and maintenance. Optical system: diffuse type.
Detection distance: 1500 positive and negative 500mm.
Beam shape: linear beam.
Beam diameter: 40mm * 1.5 m.
Resolution: 500 m.
Cable length: 0.5m. Type of input: AC voltage input.
Output type: communication; RS-232C; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some modelss are not equipped with .
The moost suitable voltage and current signal simulation, measurement and display, identification of the panel table SGE-125-0-0940 01000C-05000C.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub prressure gauge for monitoring the operation trend SGE-125-0-0940 01000C-05000C.
External event input can be applied to a variety of measurement and identification situations.
Dev
SGE-125-0-0940 01000C-05000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-125-0-0940 01000C-05000C&select=5