LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
SDV-SH5 OMRON SDV-SH5
No PHOTO
OMRON SDV-SH5
Type: 1C contact type.
Shape: square.
Terminal shape: solder terminal.
Action: alternate.
Display mode: do not display.
Operation Department color: green.
Large capacity compact type push button switch.
Can also be used as a power switch with a large capacity cut.
Can be switched from micro load (minimum applicable load 1mA DC5V) to large capacity load OMRON SDV-SH5. Size: M18, Shielded.
Sensing distance: 8 SDV-SH50 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 39 (59).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 OMRON SDV-SH5. 5 to 2,
times larger than that of any conventional OMRON Sensor .
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Size: 48 x 48mm.
Control output 1: voltage output (SSR driver).
Control output 2: voltage output (SSR driver).
Auxiliary output: 2 independent points OMRON SDV-SH5.
Power supply voltage: AC/DC24V.
Terminal type: screw terminal table type .
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: RS-485.
Event input: 1 points.
Remote SP input: -.
Transfer output: -.
Using large font PV display (white), improve visibility.
Selection, operation and setting.
Functional performance of input and output points.
Support for more extensive range of applications.
Using high PV 15.2mm display (white), improve visibility.
High speed sampling to achieve 50ms.
With auxiliary output (maximum 3 points), event input (maximum 4 points), the transmission output,
Remote SP input function, support for a variety of applications.
E5CC 60mm has a depth of slender body.
The use of communication adapter cable (sold separately) connected with a computer.
After that, no power supply connection can be set.
It can be easily set by CX-Thermo (sold separately).
Easy to connect with PLC through no program communication.
Combined temperature control device through component communication. Support for a Wide Range of Applications with Position Control,
Speed Control, Torque Control.
High-speed Response.
The G-series AC Servomotors and Servo Drives have,
achieved high-speed response capabilities, with a high,
response frequency of 1 kHz.
Suppressing Vibration of Low-rigidity Mechanisms during,
Acceleration/Deceleration.
The damping control function suppresses vibration of,
low-rigidity mechanisms or devices whose ends tend to,
vibrate. Two damping filters are provided to enable switching,
the vibration frequency automatically according to the direction,
of rotation and also via an external signal. In addition,
the settings can be made easily merely by setting the vibration,
frequency and filter values, and you are assured of stable,
operation even if the settings are inappropriate.

High-speed Positioning via Resonance Suppression Control,
The realtime autotuning function automatically estimates,
the load inertia of the machine in realtime and sets the,
optimal gain SDV-SH5. The adaptive filter automatically suppresses,
vibrationn ccaused by resonance SDV-SH5. Also, two independent,
notch filters make it possible to reduce vibration of a,
mechanism with multiple resonance frequencies.
SDV-SH5 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SDV-SH5&select=5


...more relevant model market price >>>>
Related products
OMRON
Voltage Sensor
SDV-FH5T
OMRON Voltage Sensor SDV-FH5T
Control power supply voltage: 125 VDC.
OMRON
Voltage Sensor
SDV-DH5
OMRON Voltage Sensor SDV-DH5
Control power supply voltage: 125 VDC.
OMRON
Voltage Sensor
SDV-FL3
OMRON Voltage Sensor SDV-FL3
Control power supply voltage: 48 VDC. I
OMRON
Voltage Sensor
SDV-DM3
OMRON Voltage Sensor SDV-DM3
Control power supply voltage: 48 VDC. I