Type of input: AC current input.
Output type: communication; RS-232C; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with OMRON .
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table UMM10-0600-1500
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON .
DevMeasuring voltage: 6 to 60 mV AC/DC, 10 to 100 mV AC/DC, 30 to 300 mV AC/DC .
Supply voltage: 24 VAC/DC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages and undervoltages simultaneously.
Separate settings and outputs supported for overvoltages and,
undervoltages OMRON .
Manual resetting and automatically resetting supported by one Relay.
Pre-alarm Monitoring Mode .
Two SPDT output relays, 6 A at 250 VAC (resistive load).
Process control signal (0 to 10 V) and current splitter input supported.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply. Type: controller with terminal blocks.
Size: 1/8DIN, 48 * 96 * 78mm.
Power supply voltage: AC100 ~ 240V.
Type of input: thermocouple or platinum resistance.
Alarm output: 3.
Control output: current output.
Heater disconnection: yes.
Install optional unit: have.
Best selling multi purpose thermostat is now more outstanding.
Temperature controller is now available for analog input.
A more rapid sampling rate 250ms.
Provide transfer output, can be simple output to the recorder.
The model is optional with the circuit breaking alarm (LBA) and the heater short circuit alarm (HS).
Simply set the 11 segment display.
Equipped with a manual output function.
New type of installation with communication Modbus.
USB serial conversion cable optional. Actuator: Roller plunger.
Conduit size: 1-conduit; M20.
Built-in switch mechanism: 2NC(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,,
3NC contact forms .
(SSlow-action models with MBB contacts are available OMRON UMM10-0600-1500.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used witth both standard loads and microloads OMRON UMM10-0600-1500.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC.
UMM10-0600-1500 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=UMM10-0600-1500&select=5