LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Price >> SGMSH-10A2A3B
YASKAWA Door Switches SGMSH-10A2A3B
YASKAWA SGMSH-10A2A3B
Servo motor type SGMPH (speed: 3000r\/min).
Power: 0.1kw.
Power supply voltage: single phase AC200V.
Serial encoder: 13 bit relative value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with screw key.
Optional parts: with oil seal, DC90V brake.
Partial flat series: the need to install the servo motor in a small space YASKAWA Door Switches.
Flexible user system.
For you to build the best system to enrich the product line to support you SGMSH-10A2A3B
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of YASKAWA Door Switches.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operatedHigh performance, use the best type of servo unit (high performance).
Maximum applicable motor capacity: 0.05kw.
Power supply voltage: single phase AC100V YASKAWA Door Switches.
Design sequence: B.
Hardware specification: base mounting type (standard) .
Interface: MECHATROLINK-III communication command type (rotary servo motor).
Function: no deviation standard.
High performance sigma shaped -V-EX series.
2 models of high performance servo unit.
EX001 (support M- III high speed communication): the communication cycle is the minimum value of 125 s, which makes the response of the instruction becomes faster, and the track accuracy and processing ability are improved.
EX002 (no deviation of the specification): greatly improve the command tracking performance, and further improve the accuracy of trajectory control. Sigma -V series servo motor SGMGV.
Rated output: 450W (0.45KW).
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal, with the brake (DC24V).
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: fflange type .
Heat resistaance grade: F YASKAWA SGMSH-10A2A3B.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% ((not dew) YASKAWA SGMSH-10A2A3B.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMSH-10A2A3B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMSH-10A2A3B&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Super high power motor
SGMSH-30ACA2D
Yaskawa Super high power motor SGMSH-30ACA2D
Servo motor SGMSH type. Rated speed: 300
Yaskawa
Super high power motor
SGMSH-15A2A3D
Yaskawa Super high power motor SGMSH-15A2A3D
Servo motor SGMSH type. Rated speed: 300
Yaskawa
Super high power motor
SGMSH-15A2A6C
Yaskawa Super high power motor SGMSH-15A2A6C
Servo motor SGMSH type. Rated speed: 300
Yaskawa
Super high power motor
SGMSH-15ACA6C
Yaskawa Super high power motor SGMSH-15ACA6C
Servo motor SGMSH type. Rated speed: 300