LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
YASKAWA Door Switches SGMPH-02BBA4S
YASKAWA SGMPH-02BBA4S
High performance, use the best type of servo unit (purpose type).
Maximum applicable motor capacity: 0.2kw.
Power supply voltage: single phase AC100V.
Interface: analog voltage, pulse sequence type (rotary servo motorSigma -V series servo motor SGMPS.
Rated output: 1.5kw.
Power supply voltage: AC200V YASKAWA Door Switches.
Serial encoder: 17 bit Delta (standard).
Design sequence: IP55 (standard).
Shaft end: straight shaft, without keyway (standard) SGMPH-02BBA4S
Optional: no matching.
Corresponding to the RoHS instruction: in accordance with the RoHS directive.
Medium inertia
Flat type deep short
Equipped with high resolution serial encoder (17 bit)
Max speed up to 6000r\/min
Variety is complete (100W ~ 1 YASKAWA Door Switches. 5kW, with hold brake)
Standard using IP55 . Also applies to IP67 (optional).
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B YASKAWA Door Switches.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part) .
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationLarge capacity SGMVV type servo motor.
Rated output: 30KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit absolute value type.
Rated speed: 1500r\/min.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw).
Optional parts: keep the brake (DC24V), with dust.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenServo motor SGMGH type YASKAWA SGMPH-02BBA4S.
Rated speed: 1000r\/min.
Power: 4.0kw.
Power supply voltage: threee phase AC200V YASKAWA SGMPH-02BBA4S.
Serial encoder: 17 bit relative value.
Design sequence: high precision machine tool.
Shaft end: taper 1\/10, with parallel key.








SGMPH-02BBA4S Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMPH-02BBA4S&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Servo motor
SGMPH-04A1A4C
Yaskawa Servo motor SGMPH-04A1A4C
Servo motor type SGMPH speed: 3000r/min
Yaskawa
Waterproof motor
SGMPH-15ABE6B
Yaskawa Waterproof motor SGMPH-15ABE6B
Servo motor type SGMPH speed: 3000r/min
Yaskawa
Servo motor
SGMPH-01ABA6E
Yaskawa Servo motor SGMPH-01ABA6E
Servo motor type SGMPH speed: 3000r/min
Yaskawa
Waterproof motor
SGMPH-01BBE8S
Yaskawa Waterproof motor SGMPH-01BBE8S
Servo motor type SGMPH speed: 3000r\/mi