LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Price >> SGMGH-55ACB3D
YASKAWA Door Switches SGMGH-55ACB3D
YASKAWA SGMGH-55ACB3D
Sigma -V series servo motor SGMAV.
Rated output: 1.0kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: with two side plane seat (optional).
Optional: with oil seal.
Super power rate.
Small capacity.
Ultra low inertia
Instantaneous maximum torque (rating 300%) YASKAWA Door Switches.
Equipped with a high resolution serial encoder (20 bit).
Max speed up to 6000r\/min SGMGH-55ACB3D
Variety is complete (50W ~ 1.0kw, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot,
Handling machinery,
Food processing machinery.
Rating and specifications:
Rated time: continuous YASKAWA Door Switches.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above .
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew) YASKAWA Door Switches.
Connection mode: direct connection .
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationServo motor SGMGH type.
Rated speed: 1000r\/min.
Power: 4.0kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit absolute value.
Design sequence: B.
Shaft end: straight shaft with screw key.
Optional parts: with oil seal, DC90V brake.
High speed feed series: high speed running when no load.
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain.
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number than the original product reduced by 1\/2.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed controlLow inertia, high speed servo motor type SGM7A (rated speed 3000r\/min).
Rated output: 0.2kw.
Power supply voltage: AC200V.
Serial encoder: 24 bit delta.
Design sequence: A.
Shaft end: straight shaft with keyway, with screw.
Optional parts: with hold brake (DC24V).
Small (about 80% in the past).
Equipped with high-resolution 24bit enncoder (16 million 770 thoousand \/rev pulse) YASKAWA SGMGH-55ACB3D.
The maximum torque of 350% (small capacity).
Hope to shorten the working cycle.
Want to improve positioning accuracy.
Increase speed after shaking.
Whether there is no workpiece, action is not stable.
IIt is helpful to the servo performance of ultra high speed and ultra precision control YASKAWA SGMGH-55ACB3D. most
To limit the performance of the device to solve the problem
SGMGH-55ACB3D Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGH-55ACB3D&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Motor for high precision machine tool
SGMGH-20ACD6C
Yaskawa Motor for high precision machine tool SGMGH-20ACD6C
Servo motor SGMGH type. Rated speed: 100
Yaskawa
servo motor
SGMGH-20A2B2B
Yaskawa servo motor SGMGH-20A2B2B
Servo motor SGMGH type. Rated speed: 100
Yaskawa
Motor for high precision machine tool
SGMGH-03ACD6S
Yaskawa Motor for high precision machine tool SGMGH-03ACD6S
Servo motor SGMGH type. Rated speed: 100
Yaskawa
servo motor
SGMGH-55A2B2E
Yaskawa servo motor SGMGH-55A2B2E
Servo motor SGMGH type. Rated speed: 100