LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Price >> SGMGH-06ACD3D
YASKAWA Door Switches SGMGH-06ACD3D
  • Brand: YASKAWA
  • Country:
  • Name: Motor for high precision machine tool
  • Model: SGMGH-06ACD3D
  • Price: 0
  • >
YASKAWA SGMGH-06ACD3D
Capacity type of direct drive servo motor SGMCS.
Rated torque: M \/ 80N.
Servo motor outside diameter size: 230mm.
Serial encoder: 20 bit absolute value type (absolute value of 1 circles) (standard).
Design sequence: the outer diameter of the servo motor is marked as B, C and D.
Flange specifications: face C, reverse load side (lead) YASKAWA Door Switches.
Optional specifications: no matching.
Under the condition of no speed reducer, the load is directly driven SGMGH-06ACD3D
Can be realized from low speed to high speed of the strong smooth running
(instantaneous maximum torque: 6 ~ 600N \/ m, maximum speed: 250 ~ 500r\/min).
By using 20 bit high resolution encoder, the high precision can be carried out YASKAWA Door Switches.
The use of hollow structure, convenient wiring and piping .
Use example:
Semiconductor manufacturing equipment.
Liquid crystal circuit board manufacturing equipment.
Various inspection and test equipment.
Electronic part packaging machine.
IC information processor.
IC inspection equipment.
A variety of automated machinery.
Robot。
Capacity rating and specifications:
Rated time: continuous YASKAWA Door Switches.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above .
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: A.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP42 (except for the rotating part of the output shaft).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationLarge capacity SGMVV type servo motor.
Rated output: 45KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw).
Optional parts: with hold brake (DC90V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength oof the mechanical properties YASKAWA SGMGH-06ACD3D.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusteeed, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happen
SGMGH-06ACD3D Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGH-06ACD3D&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Motor for high precision machine tool
SGMGH-40A2D6E
Yaskawa Motor for high precision machine tool SGMGH-40A2D6E
Servo motor SGMGH type. Rated speed: 100
Yaskawa
servo motor
SGMGH-15ACA3D
Yaskawa servo motor SGMGH-15ACA3D
Servo motor SGMGH type. Rated speed: 150
Yaskawa
Motor for high precision machine tool
SGMGH-05ACC31
Yaskawa Motor for high precision machine tool SGMGH-05ACC31
Servo motor SGMGH type. Rated speed: 150
Yaskawa
servo motor
SGMGH-03A2B6S
Yaskawa servo motor SGMGH-03A2B6S
Servo motor SGMGH type. Rated speed: 100