LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
SGMPH-08ABA2C YASKAWA SGMPH-08ABA2C
YASKAWA SGMPH-08ABA2C
Servo motor type SGMPH (speed: 3000r\/min).
Power: 1.5kw.
Power supply voltage: three phase AC200V.
Serial encoder: 16 bit absolute value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with screw.
Optional parts: no brake oil seal.
Partial flat series: the need to install the servo motor in a small space YASKAWA SGMPH-08ABA2C.
Flexible user system.
For you to build the best system to enrich the product line to support you SGMPH-08ABA2C
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of YASKAWA SGMPH-08ABA2C.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operatedSigma -V series servo motor SGMGV .
Rated output: 5.5kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard YASKAWA SGMPH-08ABA2C.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with hold brake (DC90V) .
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationLarge capacity SGMVV type servo motor.
Rated output: 30KW.
Voltage: three phase AC200V.
Serial encoder: 20 bit delta.
Rated speed: 800r\/min.
The main mechanical structure: support mounting type, straight shaft (without keyway and screw).
Optional parts: keep the brake (DC90V), with dust.
The use of small, low inertia servo motor, also can give full play to the strength oof the mechanical properties SGMPH-08ABA2C.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusteeed, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happen
SGMPH-08ABA2C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMPH-08ABA2C&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Waterproof motor
SGMPH-08AAE81
Yaskawa Waterproof motor SGMPH-08AAE81
Servo motor type SGMPH speed: 3000r\/mi
Yaskawa
Servo motor
SGMPH-02B1A6S
Yaskawa Servo motor SGMPH-02B1A6S
Servo motor type SGMPH speed: 3000r\/mi
Yaskawa
Servo motor
SGMPH-02BAA4C
Yaskawa Servo motor SGMPH-02BAA4C
Servo motor type SGMPH speed: 3000r\/mi
Yaskawa
Servo motor
SGMPH-08A1A4B
Yaskawa Servo motor SGMPH-08A1A4B
Servo motor type SGMPH speed: 3000r/min