LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Price >> SGMGH-30ACB6E
SGMGH-30ACB6E YASKAWA Door Switches SGMGH-30ACB6E
YASKAWA SGMGH-30ACB6E
Servo motor SGMGH type.
Rated speed: 1500r\/min.
Power: 2.9kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit absolute value.
Design sequence: high precision machine tool.
Shaft end: taper 1\/10, with parallel key.
Optional parts: with oil seal, DC24V brake.
High speed feed series: high speed running when no load YASKAWA SGMGH-30ACB6E.
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain SGMGH-30ACB6E
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number than the original product reduced by 1\/2 YASKAWA SGMGH-30ACB6E.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed controlHigh performance, use the best type of servo unit (high performance) .
Maximum applicable motor capacity: 0.2kw.
Power supply voltage: single phase AC100V.
Design sequence: B.
Hardware specification: base mounting type (standard).
Interface: MECHATROLINK-III communication command type (linear servo motor) YASKAWA SGMGH-30ACB6E.
Function: support 125 s communication cycle .
High performance sigma shaped -V-EX series.
2 models of high performance servo unit.
EX001 (support M- III high speed communication): the communication cycle is the minimum value of 125 s, which makes the response of the instruction becomes faster, and the track accuracy and processing ability are improved.
EX002 (no deviation of the specification): greatly improve the command tracking performance, and further improve the accuracy of trajectory control. Sigma -V series servo motor SGMSV.
Rated output: 2.0kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC24V).
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: fflange type .
Heatt resistance grade: F SGMGH-30ACB6E.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% ((not dew) SGMGH-30ACB6E.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMGH-30ACB6E Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGH-30ACB6E&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Motor for high precision machine tool
SGMGH-06A2D2C
Yaskawa Motor for high precision machine tool SGMGH-06A2D2C
Servo motor SGMGH type. Rated speed: 100
Yaskawa
Motor for high precision machine tool
SGMGH-15ACC3B
Yaskawa Motor for high precision machine tool SGMGH-15ACC3B
Servo motor SGMGH type. Rated speed: 150
Yaskawa
servo motor
SGMGH-55A2B61
Yaskawa servo motor SGMGH-55A2B61
Servo motor SGMGH type. Rated speed: 100
Yaskawa
Motor for high precision machine tool
SGMGH-30ACC61
Yaskawa Motor for high precision machine tool SGMGH-30ACC61
Servo motor SGMGH type. Rated speed: 150