LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
SGMCS-05B3C11 YASKAWA Door Switches SGMCS-05B3C11
YASKAWA SGMCS-05B3C11
Sigma -V series servo motor SGMJV.
Rated output: 0.6kw (600W).
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal.
Medium inertia.
Instantaneous maximum torque (rating 350%).
Equipped with a high resolution serial encoder (13\/20 bit) YASKAWA SGMCS-05B3C11.
Max speed up to 6000r\/min.
Variety is complete (50 ~ 750W, with hold brake) SGMCS-05B3C11
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot,
Handling machinery,
Food processing machinery.
Rating and specifications:
Rated time: continuous YASKAWA SGMCS-05B3C11.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above .
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew) YASKAWA SGMCS-05B3C11.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationSigma -v series servo unit SGDV .
Maximum applicable motor capacity: 0.4kw.
Power supply voltage: three phase AC200V.
Design sequence: A type.
Interface: MECHATROLINK- III communication command type (rotary servo motor).
Matching (hardware): base mounting type (standard).
Realize real time communication
With the maximum transmission speed of 100Mbps and the set of communication cycle 125S ~ 4ms, to achieve a more than 62 stations of the high speed control.
Through the high speed of communication, can send and receive all kinds of control information in real time.
Contribute to cost savings
A maximum of 62 stations can be connected to the communication line, can significantly reduce wiring costs and time.
The command connector of the upper controlller only needs 1,,
Pulse generator for D/A converter or position instruction without speed / torque command SGMCS-05B3C11.
High precision motion control is realized.
In addition to torque, position and speed control, but also to achieve high precision synchronizzattion phase control SGMCS-05B3C11.
Because the control mode can be switched on line, the complicated mechanical action can be realized more effectively and smoothly.
SGMCS-05B3C11 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMCS-05B3C11&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Direct drive servo motor
SGMCS-80CDC11
Yaskawa Direct drive servo motor SGMCS-80CDC11
Capacity type of direct drive servo moto
Yaskawa
Direct drive servo motor
SGMCS-2ZE3B11
Yaskawa Direct drive servo motor SGMCS-2ZE3B11
Capacity type of direct drive servo moto
Yaskawa
Direct drive servo motor
SGMCS-04D3C41
Yaskawa Direct drive servo motor SGMCS-04D3C41
SGMCS small capacity type of direct driv
Yaskawa
Direct drive servo motor
SGMCS-05C3C41
Yaskawa Direct drive servo motor SGMCS-05C3C41
SGMCS small capacity type of direct driv