Model: CPM2A-30CDT1-D. Power supply: DC power supply.
Output type: Transistor sourcing.
Inputs points: 18 points.
Outputs points: 12 points.Model: C500-CE241.
Connection : Soldered.
FCN-361J024-AU Connector
FCN-360C024-J2 Connector cover
I/O bits: 5, 120 (Expan-sion Racks: 7) CS1H-CPU64H.
Program capacity: 30K steps.
Data memory ccapacity: 64K words (DM: 32K words, EM: 32K words ×1 banks).Model: C500-BC061(3G2A5-BC061).
6 slots(5 linkable slots).
Name: e-CON Connectors CS1H-CPU64H.
Specifications: Inputs; 32 inputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CS1H-CPU64H.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON CS1H-CPU64H. I/O points: 512 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Analog Output Unit OMRON CS1H-CPU64H.
Output points : 4 inputs.
Signal range selection:
Set separately for each input.
Signal range: 4 to 20 mA, 1 to 5 V.
Conversion speed (resolution):
100ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1 OMRON CS1H-CPU64H.
Current consumption: 5V, 0.15A; 26V, 0.16A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring. <
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems CS1H-CPU64H.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.